Sunday
|
2:00 pm - 9:00 pm |
Arrival and Check-in
|
6:00 pm - 7:00 pm |
Dinner
|
7:30 pm - 7:40 pm |
Introductory Comments by GRC Site Staff / Welcome from the GRC Chair
|
7:40 pm - 9:30 pm |
Soft Tribology
Discussion Leader: David Burris (University of Delaware, USA)
|
7:40 pm - 8:20 pm |
Rosa M. Espinosa-Marzal (University of Illinois at Urbana-Champaign, USA)
"Controlling Lubricity of Interfaces with Hydrogels"
|
8:20 pm - 8:35 pm |
Discussion
|
8:35 pm - 9:15 pm |
Alison Dunn (University of Illinois at Urbana-Champaign, USA)
"Control of Lubrication by Soft Gradient Surface Layer Mechanics"
|
9:15 pm - 9:30 pm |
Discussion
|
Monday
|
7:30 am - 8:30 am |
Breakfast
|
8:30 am - 9:00 am |
Group Photo
|
9:00 am - 12:30 pm |
Adhesive Phenomena in Tribology
Discussion Leader: Kathryn Wahl (U.S. Naval Research Laboratory, USA)
|
9:00 am - 9:40 am |
Tevis Jacobs (University of Pittsburgh, USA)
"Towards Understanding Adhesion Across Length-scales: Nanoscale Insights Applied to Rough Macroscale Contacts"
|
9:40 am - 10:00 am |
Discussion
|
10:00 am - 10:30 am |
Coffee Break
|
10:30 am - 11:10 am |
Ramin Aghababaei (Aarhus University, Denmark)
"The Origins of Surface Material Removal during Sliding Contact Across Scales"
|
11:10 am - 11:30 am |
Discussion
|
11:30 am - 12:10 pm |
Jean DENAPE (Production Engineering Laboratory LGP-ENIT, France)
"The Third-body Concept: A Pragmatic Tool for Analyzing and Understanding Friction and Wear of Materials"
|
12:10 pm - 12:30 pm |
Discussion
|
12:30 pm - 1:30 pm |
Lunch
|
1:30 pm - 4:00 pm |
Free Time
|
3:00 pm - 4:00 pm |
The GRC Power Hour™
The GRC Power Hour™ is designed to address diversity and inclusion in the scientific workplace by providing a safe environment for informal and meaningful conversations amongst colleagues of all career stages. The program supports the professional growth of all members of our communities, including ethnicity, race and/or gender identity by providing an open forum for discussion and mentoring.
Organizers: Alison Dunn (University of Illinois at Urbana-Champaign, USA) and Jacqueline Krim (North Carolina State University, USA)
|
4:00 pm - 6:00 pm |
Poster Session
|
6:00 pm - 7:00 pm |
Dinner
|
7:30 pm - 9:30 pm |
Probing the Sliding Interface
Discussion Leader: Angela Pitenis (University of California, Santa Barbara, USA)
|
7:30 pm - 8:10 pm |
Antonella Rossi (ETH Zürich, Switzerland / University of Cagliari, Italy)
"Challenges in Analytical Multi-scale Characterization of Sliding Interfaces"
|
8:10 pm - 8:30 pm |
Discussion
|
8:30 pm - 9:10 pm |
James Schall (North Carolina Agricultural and Technical State University, USA)
"On the Stochastic Nature of Friction - Predicting and Reducing Variability in Friction Behavior"
|
9:10 pm - 9:30 pm |
Discussion
|
Tuesday
|
7:30 am - 8:30 am |
Breakfast
|
9:00 am - 12:30 pm |
Lamellar Solid Lubricants
Discussion Leader: Thomas Scharf (University of North Texas, USA)
|
9:00 am - 9:40 am |
John Curry (Sandia National Laboratories, USA)
"MoS2: The Burgundy of Lubricants - Terroir and the Hazards of Aging and Oxidation"
|
9:40 am - 10:00 am |
Discussion
|
10:00 am - 10:30 am |
Coffee Break
|
10:30 am - 11:10 am |
Clotilde Minfray (École Centrale de Lyon, France)
"Effect of Environment on Friction Reduction Capabilities of MoDTC Additive"
|
11:10 am - 11:30 am |
Discussion
|
11:30 am - 12:10 pm |
Andreas Rosenkranz (University of Chile, Chile)
"2D MXenes: Tunable mechanical and tribological properties"
|
12:10 pm - 12:30 pm |
Discussion
|
12:30 pm - 1:30 pm |
Lunch
|
1:30 pm - 4:00 pm |
Free Time
|
4:00 pm - 6:00 pm |
Poster Session
|
6:00 pm - 7:00 pm |
Dinner
|
7:30 pm - 9:30 pm |
Understanding the Sliding Interface
Discussion Leader: Filippo Mangolini (The University of Texas at Austin, USA)
|
7:30 pm - 8:10 pm |
Nicolas Fillot (INSA Lyon, France)
"Numerical Modeling of Dry and Lubricated Friction, and How They are Not so Different From Each Other"
|
8:10 pm - 8:30 pm |
Discussion
|
8:30 pm - 9:10 pm |
Prathima Nalam (University at Buffalo, USA)
"Atomic-scale Behavior of Graphene in Non-polar Solvents"
|
9:10 pm - 9:30 pm |
Discussion
|
Wednesday
|
7:30 am - 8:30 am |
Breakfast
|
9:00 am - 12:30 pm |
Tribology at the Extreme
Discussion Leader: Marina Ruths (University of Massachusetts Lowell, USA)
|
9:00 am - 9:40 am |
Pantcho Stoyanov (Concordia University, Canada)
"Tribological Systems Solutions for Gas Turbine Engines"
|
9:40 am - 10:00 am |
Discussion
|
10:00 am - 10:30 am |
Coffee Break
|
10:30 am - 11:10 am |
Joichi Sugimura (International Institute for Carbon-Neutral Energy Research, Kyushu University, Japan)
"Low Friction of Rubbers in Controlled-gas Environment"
|
11:10 am - 11:30 am |
Discussion
|
11:30 am - 12:10 pm |
Satish Achanta (ASML BV, The Netherlands)
"Tribology and Moore’s law: How Friction and Wear Impact Chip Manufacturing"
|
12:10 pm - 12:30 pm |
Discussion
|
12:30 pm - 1:30 pm |
Lunch
|
1:30 pm - 4:00 pm |
Free Time
|
4:00 pm - 6:00 pm |
Poster Session
|
6:00 pm - 7:00 pm |
Dinner
|
7:00 pm - 7:30 pm |
Business Meeting
Nominations for the Next Vice Chair; Fill in Conference Evaluation Forms; Discuss Future Site and Scheduling Preferences; Election of the Next Vice Chair
|
7:30 pm - 9:30 pm |
Tribologically-Induced Surface Changes and Wear
Discussion Leader: Richard Chromik (McGill University, Canada)
|
7:30 pm - 8:10 pm |
Alfons Fischer (Rush University, Germany)
"Let’s Get Dirty - Fretting Wear of Biomedical Materials"
|
8:10 pm - 8:30 pm |
Discussion
|
8:30 pm - 9:10 pm |
Christian Greiner (Karlsruhe Institute of Technology, Germany)
"Diffusion Pathways for Friction-induced Oxidation"
|
9:10 pm - 9:30 pm |
Discussion
|
Thursday
|
7:30 am - 8:30 am |
Breakfast
|
9:00 am - 12:30 pm |
Electric Vehicle and Green Tribology
Discussion Leader: Brian Borovsky (St. Olaf College, USA)
|
9:00 am - 9:40 am |
Arup Gangopadhyay (Ford Scientific Research Laboratories, USA)
"An Overview of Hybrid, Full Electric, and Fuel Cell Vehicles"
|
9:40 am - 10:00 am |
Discussion
|
10:00 am - 10:30 am |
Coffee Break
|
10:30 am - 11:10 am |
Peter Lee (Southwest Research Institute, USA)
"Electrifying Tribometers for Electric Vehicle Testing"
|
11:10 am - 11:30 am |
Discussion
|
11:30 am - 12:10 pm |
Farrukh Qureshi (The Lubrizol Corp., USA)
"Tribological Challenges in e-Vehicles"
|
12:10 pm - 12:30 pm |
Discussion
|
12:30 pm - 1:30 pm |
Lunch
|
1:30 pm - 4:00 pm |
Free Time
|
4:00 pm - 6:00 pm |
Poster Session
|
6:00 pm - 7:00 pm |
Dinner
|
7:30 pm - 9:30 pm |
Keynote Session: Tribology for Health
Discussion Leader: Seong Kim (Pennsylvania State University, USA)
|
7:30 pm - 8:30 pm |
Robert Carpick (University of Pennsylvania, USA)
"Saving Lives and Saving the Planet with Tribology"
|
8:30 pm - 9:15 pm |
Discussion
|
9:15 pm - 9:30 pm |
Closing Remarks
|
Friday
|
7:30 am - 8:30 am |
Breakfast
|
9:00 am |
Departure
|